                        ============================
                         R E L E A S E    N O T E S
                        ============================

                QLogic QCS command line interface utility
								for Linux

                Copyright (c) 2016 QLogic Corporation
                          All rights reserved.
							  

Version 30.0.22 (March 5, 2016)
-----------------------------------
Fixes:
	1. Performance Optimizations
	
Version 30.0.21 (March 3, 2016)
-----------------------------------
Fixes:
	1. Cont00085400 - Adapter name for 10G/25G/100G differs between QCC GUI & QCScli
	2. Cont00085175 - QCScli 32-bit gives trace while quitting
	
Version 30.0.20 (February 26, 2016)
-----------------------------------
Fixes:
	1. Cont00085253 - QCScli: Readme notes file needs to be updated with all supported Operating systems
	2. Cont00084979 - IP address info is not seen in QCScli for E3/E4 adapters
	3. Cont00085248 - QCScliPPC64LE fails to launch in SELS12SP1 PPCLE64.
	4. Cont00085184 - Multiple sriov issue with QCScli for QLogic E3 adapter
	5. Cont00085084 - QCSCLI 30.0.17 displays non-default NDIS Advanced Parameters as default for on E3
	6. Cont00085311 - QCScliPPC64LE shows "Interface" as "Down" even though the interface is "UP" under L2NIC level in PowerkvmPPC64LE
	7. Cont00085219 - QCScliPPC64 is not setting the Receive Buffers value below 128 in SLES11SP4 PPC64
	8. Cont00083662 - QCScli displays unwanted messge while launching
	
Version 30.0.19 (February 22, 2016)
-----------------------------------
Fixes:
	1. Cont00085178 - QCCGUI is not asking for reboot when Max.Bandwidth Settings are changed on NPAR functions
	
Version 30.0.18 (February 19, 2016)
-----------------------------------
Fixes:
	1. Cont00084978 - VPD info not seen in QCScli for QL 25G adapter
	2. Cont00085075 - Delay in displaying list devcon info in QCSCLI 30.0.17
	3. Cont00085111 - Unable to convert SF to MF using QCSCLI 30.0.17 on Dell Bavaria
	4. Cont00084915 - NPAR config is showing incorrectly, should be 0-15
	5. Cont00085020 - Current NDIS Adv. Param setting shows as Unknown and all params are displayed in digits after setting FlowControl on Windows
							  
Version 30.0.17 (February 15, 2016)
-----------------------------------
Fixes:
	1. Cont00084984 - QCS v30.0.16.0 app (32-bit) is crashing while closing on E3 adapters
	2. Cont00084916 - QCSCLI doesn't throw error if NPAR BW is set other than 0 or 100 per port on Dell Serpens under Windows
	3. Cont00084695 - For QL 25G adapter num of VFs option must be disabled
	4. Cont00084907 - QCScliPPC64BE: Application shows MAC Loopback test is not support in RHEL7.2PPC BE
	5. Cont00084958 - Wrong status shown in boot congig for few params
	6. CQ 83599 iSCSI Ping Test fails on E4 Brussels using QCSCLI 30.0.7 under Windows
	7. Cont00084970 - Not able to create any team in expert mode.
	8. Cont00084979 - IP address info is not seen in QCScli for E3/E4 adapters
	9. Cont00084706 - QCScliPPC64LE shows link speed is shown as 0 under port level in SLES12PPC64LE
	
Version 30.0.16 (February 5, 2016)
-----------------------------------
Fixes:
	1. Removed 0xE4F6 device ID from BavariaD check to fix NPAR display
	2. Fixed CQ 84404 Bootcfg restore fives seg fault with QCScli RPC. Also requires dynamic link for libxml
	3. Cont00084694 - Not able to create team on BCM57840 Sirius card
	4. Cont00084817 - QCSCLI with RPC/local shows MF "Feature not supported" on Dell Serpens under Win 2012R2
	5. Cont00084817 - QCSCLI with RPC fails t configure MR under Win 2012R2
	
Version 30.0.15 (January 30, 2016)
-----------------------------------
Fixes:
	1. Fixed CQ 084315 Unable to connect remote host with Hostname through RPC using QCSCLI
	2. Cont84400 fix part 2 (RPC fix)
	3. Added dos2unix on qlgc_pci.ids file.  Fixes CQ84394.
	4. Fixed Cont00084404 - Bootcfg restore gives seg fault with QCScli RPC connection
	5. Fixed Cont00084405 - Restoring advanced params gives seg fault with QCScli RPC
	6. Removed username and port from addhost/disccoverhost help on CLI
	7. Removed speedDuplex from VBD level
	8. Cont00084275 - QCSCLI_RPC fails to set max_chains_per_vf at EVBD on Bavaria Q under Windows
	9. Cont00082314 - QCS CLI doesn't have Restore Default option for DCBX Configuration , unlike QCS GUI
	10. Cont00084701 - QCS CLI not returning back to proper prompt after executing invlaid command.
	11. Fix for Cont00084477
	12. Fix for Cont00084685
	
Version 30.0.14 (January 22, 2016)
-----------------------------------
Fixes:
	1. Cont00084423 - FFV for Dell not displayed
	2. PPC LE Fixes
	3. Cont00084267 - NDIS Parameters mismatch between QCCGUI an QCSCLI on QL-Bavaria
	4. Cont00084289 - QCSCLI is not asking for reboot after updating SRIOV on QL-Bavaria
	5. Cont00084400 - QCSCLI shows wrong qlasp driver status on Linux
	6. Cont00084398 - QCSCLI shows wrong banner timeout info
	7. Cont00084367 - QCSCLI always displays Flow Control as Disabled in NDIS on 25G
	8. Removed max_chains_per_vf from NDIS level
	9. Fixed MAX_E4_VFs in SF mode
	10. Cont00084093 - QCCGUI/QCSCLI RPC don't have option to set VFs per PF on NPAR Functions on E4 under Windows
	11. Fixed BW weights
	
Version 30.0.13 (January 19, 2016)
-----------------------------------
Fixes:
	1. QLmapi fix
	
Version 30.0.12 (January 15, 2016)
-----------------------------------
Fixes:
	1. Cont00084093 - QCCGUI/QCSCLI RPC don't have option to set VFs per PF on NPAR Functions on E4 under Windows
	
Version 30.0.11 (January 8, 2016)
-----------------------------------
Fixes:
	1. Updated SRIOV not supported message when link is down
	2. Fixed SF display when in MF mode for E4
	3. Relaxed SupportNPAR() check
	4. Cont00083702 - QCScli with rpc protocol shows NDIS/VBD devtype in linux
	5. Cont00084111 - QCSCLI shows "Configure SRIOV max chains per vf successful" while updating VFs per PF on Bavaria-QL using QCSCLI
	6. Cont00084212 - QCSCLI_RPC shows "SRIOV is not supported" on Bavaria-QL under Win 2012 R2
	7. Cont00084115 - QCSCLI RPC shows Switch/VM Friendly Names wrong on Bavaria-QL under Windows
	8. Cont00083988 - Added 10G and 25G for BavariaD to QCC/QCS
	
Version 30.0.10 (December 23, 2015)
-----------------------------------
Fixes:
	1. Cont00083615 - Removed max chains per vf from adapter level
	2. Cont00082904 - Fixed invalid advanced param message
	3. Fixed cfg multi-function command crash
	4. Cont00083998 - QCSCLI RPC 30.0.9 crashes while displaying NDIS params after config
	5. Fixed CLI BCM57800 device management
							  
Version 30.0.9 (December 11, 2015)
-----------------------------------
Fixes:
	1. Merged in CIM E4 branch changes
	2. Cont00082714 - Hiding MBA config for 3rd party adapters
	3. Cont00083820 - Mismatch VF Chains pool size on E4
	4. Cont00083905 - Brussel E4 QLE8562 got corrupted one port when changed from NPAR to SF mode
	5. Cont00083615 - Configure SRIOV max chains per vf fails on Brussels/QLogic Bavaria using QCSCLI RPC 30.0.7 on Windows
							  
Version 30.0.8 (December 4, 2015)
-----------------------------------
Fixes:
	1. Cont00083736 - To change display message "Failed to get the active multi-function" regarding multifunction on 100G adapter in QCSCLI RPC
	2. Cont00083737 - QCSCLI RPC displays SRIOV info on 100G adapter under Windows

Version 30.0.7 (November 20, 2015)
-----------------------------------
Fixes:
	1. Removed Bmapi libraries dependency.
	
Version 30.0.6 (November 13, 2015)
-----------------------------------
Fixes:
	1. Added update password functionality to CLI

Version 30.0.5 (November 6, 2015)
-----------------------------------
Fixes:
	1. Rebranded a few missed BASP strings
	2. Fixed CLI NDIS advanced config
	3. Disabled password textbox when connecting to localhost
	4. Added GUI set password
	5. Removed SRIOV info from iSCSI/FCoE on E4


Version 30.0.4 (October 30, 2015)
-----------------------------------
Initial QCS CLI release.

Fixes
=================

N/A - initial release

    
Enhancements:
=================

N/A - initial release
